MOSFETs used in controllers

Inspired by Tony’s video discussing ADV, GT controllers and little FOCer I wanted to check specs of MOSFET specs of other controllers for comparison.

  • ubox single 100V 100A - MDT10N023RH - 100/300A - Rds 2.3mOHM (source: Spintend support email)
  • ubox single 80V 100A - JMSH1001ATL - 100V/375A (or 411A) - Rds 1.3mOHM (source: Spintend support email)
  • ubox single 85V 200A - JMSH1001ATL - 100V/375A (or 411A) - Rds 1.3mOHM (BUT 12 mosfets instead of 6 !) (source: Single Ubox Aluminum controller 85V 250A based on VESC | Spintend)
  • flipsky 75100 Alu (100A) - HYG015N10NS1TA - 100V/380A - Rds 1.2mOHM (source: Flipsky 75100 With Aluminum PCB Based on VESC For Electric Skateboard – FLIPSKY - look at the pictures)
  • floatwheel ADV - HYG015N10NS1TA - 100V/380A - Rds 1.2mOHM (source: abovementioned Tony’s video)
  • lilfocer 3.1 - HY5110W - 100V/316A - Rds -2.1mOHM (source: abovementioned Tony’s video)
  • OW GT - SVG103R0NT(S) - 100V/180A - Rds - 2.5mOHM (source: abovementioned Tony’s video)
  • ubox 75v single - FDBL0150N80 - 80V/300A - Rds - 1.4mOHM (source: auden_builds|PubWheel@Vescify, Discord)
  • raiden 7 - IPT012N08N5 - 80V/400A - Rds - 1.2mOHM (source: auden_builds|PubWheel@Vescify, Discord)
  • XR, Plus: IRF7759 - 75V/160A - Rds - 1.8mOHM (source: auden_builds|PubWheel@Vescify, Discord)
  • Pint: TPH2R608NH - 75V/150A - Rds - 2.1mOHM (source: auden_builds|PubWheel@Vescify, Discord)

Datasheet URLs I based on:

4 Likes

It may seem that you can pump 300A/1.2 mOHm through a controller, but in reality, those numbers are guaranteed at 20V and room temperature. I would not push more than 150A per one MOSFET, but I hope tony board will prove me wrong.

What about the Tronic 250r?

HY5012W 310A/2.9 mOHM