Hey, so like heres how i wired up my shiny new momentary switches:
First confirm you are building for thor 301
the size of connectors are JST-GH 1.25
i went ahead and bought a little kit on amazon of GH connectors with precrimped ends, i find this is the only possible way to do it after buying a crimper and tiny wire and throwing both away YRMV….
the photo below shows how i pinned my male end
from left to right, lever down:
Black: Ground(GND)
Yellow: ONL
Red: 5v
Green: ONH
switches with lights will always have the same pin orentation.
switches without lights will not have Positive or Negative terminals
Here is your cheatsheet
(-) NEGATIVE: GND = BLACK
(NO) NORMALLY OPEN: ONL = YELLOW
(+) POSITIVE: 5V = RED
(C) COMMON: ONH = GREEN
BOOM, wrap it up and call it a day.
Feel free to ask any questions, other controllers pins will vary, and you will need to adjust.